background image

Note :

 When an incoming call is recorded, the 

ASAP P2.5X

  will call the programmed telephone

number. Upon answering the call, you will hear, “You have a message. Please press 2 to play
recorded message.” You may repeat the same procedure 3 times.

To cancel an outside telephone number 

 

 

1.    Lift the handset - the system tone is heard.
2.    Press 

 

 

3.    Hang up.

To enter a pager number 

 

 

 pager number   

1.    Lift the handset - the system tone is heard
2.    Press 

 

3.    Enter pager number (max. 25 digits).
4.

 

Press 

5.

 

Hang up.

Note: 

When a page is received, your extension number will appear on your pager display.

To cancel a pager number 

 

 

1.    Lift the handset - the system tone is heard.

2.    Press 

 

 

3.    Hang up.

Note:  

If you enter both a telephone number and a pager number, the telephone number has priority over

the pager number.

6. Basic telephony operations

6.1 Intercom call

To dial an internal extension:

1.

Lift the handset - the system tone is heard.

2.    Enter the desired extension number 

 

 ~ 

 

Note:

 The system can be programmed to notify you when a busy extension becomes available. (See

Section 6.8 page 22).

19

ASAP P2.5X Operator’s Guide

Summary of Contents for ASAP P2.5X

















































Reviews: