31
LOCAL NETWORK
HUB OR SWITCH
TO THE 12V POWER SUPPLY
OF THE CONTROL PANEL
NETWORK CABLE FOR CONNECTION
OF THE IP MODULE OF THE CONTROL PANEL
NETWORK CABLE
CONNECTION TERMINALS
SIGNAL FOR 4 CAMERAS
NETWORK CABLE FOR CONNECTION
IP CAMERA
CONNECTING VEDOCCTV WITH SWITCH/HUB AND CONTROL
PANEL POWER SUPPLY
CONNECTING THE VEDOCCTV MODULE WITH POE SWITCH/HUB
MMS SUPPORT – SYSTEM DESCRIPTION AND MINIMUM RE-
QUIREMENTS
VIDEO STREAMING SUPPORT, RECORDING FILMS AND FRAME
CAPTURES - DESCRIPTION OF THE MINIMUM FEATURES OF
THE SYSTEM
NETWORK PARAMETERS OF PAL/IP MODULE
• inform the recipient, by MMS, of an alarm event relating to
a zone covered by a specific camera (one camera can be
associated to a given zone).
• include in the same message up to 4 different frames,
captured at different times by the camera associated to the
zone in alarm.
• the alert function will send 4 frames (captured in successive
moments by the camera in the alarm zone) to system
managers (Vedo Touch, Mini Touch, Icona Manager VIP)
and to App.
• the live streaming function will allow the reproduction of the
desired camera to be sent by the system manager (Vedo
Touch, Mini Touch, Icona Manager VIP) and by App;
• the film viewing function will allow the reproduction of the
recording to be sent in streaming by the system manager
(Vedo Touch, Mini Touch, Icona Manager VIP) or by App;
To be correctly configured by the control panel, the VEDOCCTV
module must be reachable at a known IP address. To ensure
that the communication works in both directions, it is necessary
for the PAL/IP to know the control panel IP address. In default
configuration, the PAL/IP module has the following parameters:
IP Address
: 192,168.1,233
Submask
: 255,255,255.0
Control panel IP Address:
192,168.1,230
TCP Port control panel
10012
These parameters can be modified when you configure the
system.
IMPORTANT: In order to use the send MMS on alarm
function, the control panel must be equipped with the IP
module and the GSM module.
The power supply from switch/hub does not allow
the device to operate in case of temporary absence
of mains power.
The power supply from the control panel allows the
device to operate in case of temporary absence of
mains power.
IMPORTANT: In order to use the video streaming functions
from the IP cameras on alarm, the control panel must be
equipped with the IP module.
In order to use:
• the function of sending 4 frames captured by the camera
in the alarm zone to system managers (Vedo Touch, Mini
Touch, Icona Manager VIP)
and App;
• the function of activating live streaming by the system
manager (Vedo Touch, Mini Touch, Icona Manager VIP) or
by App;
the control panel must be equipped with the Ethernet
expansion module.
After configuring the system correctly, the MMS function will:
After configuring the system and the film recording function
correctly:
LOCAL NETWORK
POE SWITCH / HUB
NETWORK CABLE FOR CONNECTION
TO THE IP MODULE OF THE CONTROL PANEL
NETWORK CABLE
CONNECTION TERMINALS
SIGNAL FOR 4 CAMERAS
NETWORK CABLE FOR CONNECTION
IP CAMERA
CONFIGURATION JUMPERS
Name Function
JP1
Internal use
CN2
Reserved
JP2
Resetting configuration
TECHNICAL SPECIFICATIONS
Features Value
Name of manufacturer / supplier
Comelit Group S.p.A.
Dimensions (b x h x d)
83 x 66 x 37 mm
Weight
85g
Consumption (min./max.)
75mA with camera off
95mA with camera on
Operating voltage
10V at 24V on aux
POE on ethernet
Operating temperature
-10° / +40° C
Operating humidity
max +85% RH (not condensed)
• Signalling camera and SD faults
• Extraction, archiving and sending of frames (from a
minimum of 1 to a maximum of 4) from the video of the
analogue and IP cameras.
• Archiving and reproduction in streaming (up to a maximum
of 10 seconds with possibility of anticipating the start of the
recording with respect to the moment of the alarm) of a film
from all the IP cameras and one chosen analogue camera.
• Possibility of connection to a PoE switch/hub, in order to do
without the power supply from the control panel (NB: the
power supply from the control panel allows the device to
operate in case of temporary absence of mains power).
If an analogue camera has the video recording on pre-
alarm function enabled, the VEDOCCTV will not be able
to detect the status of the remaining analogue cameras
(enabled, faulty, not connected).
