manualshive.com logo in svg

Comdial Large Screen Display Speakerphone, User Manual, Page: 92 / 144

Share
Download
Comdial Large Screen Display Speakerphone User Manual Download Page 92

Other Advanced Features 

84

Comdiall

June, 03

•  The 

headset

 

mode

 allows you to operate your telephone with a 

headset instead of as a speakerphone or with the handset.

•  The 

recorder

 

mode

 allows you to send your voice and that of 

the distant party to a tape recorder.

•  The 

ringer

 

mode

 allows an external speaker to sound the 

ringing of your telephone.

•  The 

pager

 

mode

 allows an external paging device to sound all 

voice announcements (all-call, zone paging, voice announced 
intercom calls) sent to your telephone.

•  Program the enable/disable buttons (at any blank 

programmable button location) as follows:

1.  SELECT  OPTIONS.
2.  SELECT Programming.
3.  SELECT  NEXT until the  Feature Button  option appears.
4.  SELECT  Feature Button.
5.  PRESS blank programmable button 

location to serve as enable/disable 
button for the feature youve selected.

6.  SELECT  NEXT until desired auxil-

iary feature  appears.

•   APAGE to choose pager
•   ARECD to choose recorder
•   ARING to choose external ringer
•   Headset to choose headset

Note:  The recorder, external ringer, or pager requires external 
power.

Auxiliary Jack Location

Summary of Contents for Large Screen Display Speakerphone

















































































































































Reviews:

No comments