Comdial Large Screen Display Speakerphone User Manual Download Page 16

Page: 16 / 144

Getting Started

Comdiall

June, 03

1.4 Understanding the Basic Functions

Your speakerphone provides many versatile features for your use.
These features are explained in terms of what they allow you to do.

Alphanumeric Display (Liquid Crystal DisplayLCD)

• Displays time, day, date, and active call information.
• Keeps you apprized of the status of your telephone.
• Provides programming prompts.

Auxiliary Jack

Your Impact SCS LCD speakerphone may be equipped with an
auxiliary jack that provides an interface for a headset, a tape
recorder, an external ringer, or an external pager.

Message-Waiting Light

Indicates that a message awaits pick up.

Microphone Opening

Allows hands-free operation of speakerphone (speak clearly
toward microphone opening).

Speaker

• Sounds distant partys voice.
• Sounds ringing and call-in-progress tones.

Summary of Contents for Large Screen Display Speakerphone

















































































































































Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Comdial Large Screen Display Speakerphone, User Manual, Page: 16 / 144

Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews: