Comdial Large Screen Display Speakerphone, User Manual, Page: 89 / 144

Share

Page: 89 / 144

Comdial Large Screen Display Speakerphone User Manual Download Page 89

Large Screen Display Speakerphone User’s Guide

June, 03

Comdial.

81

• To interrupt the redialing procedure so that you can scroll

through numbers in your redial queue,

1. While your telephone is in the process of dialing a number, SELECT

Auto Redial or the programmed AUTOMATIC REDIAL button
twice. This treats the number as answered, cancels automatic redialing
for that number, and puts the number back in the automatic redial
queue. The display shows the last number dialed.

2. CHOOSE from one of the following:

• SELECT REMOVE to remove the number from the redial queue.
• SELECT NEXT to scroll to the next number in the queue.
• SELECT EXIT to exit from the redial queue.

• To cancel the automatic redial feature, choose one of the

following:

1. PERFORM any user activity at the station (go on-hook, select the

speaker button, etc.),

2. DIAL #72 to delete all numbers from the redial queue,
3. SELECT Auto Redial or the programmed AUTOMATIC REDIAL

button while the number you wish to remove from the redial queue is
ringing.

7.5 Tracker Paging System

When installed with your system, the Tracker Paging System option
allows you to send call back and parked call messages to Tracker
pagers assigned to station extension numbers. Along with the parked
call message, the system parks the call in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alphanumeric or numeric-only) is dependent upon the Tracker pager
model in use at the station.When outside callers call into a system that
has both a Tracker Paging option and a voice mail option installed,
the system gives these callers the option of either leaving a message
or tracking the person that they are calling.

«
...
87
88
89
90
91
...
»

Summary of Contents for Large Screen Display Speakerphone

















































































































































Reviews:

No comments