manualshive.com logo in svg

Comdial Large Screen Display Speakerphone, User Manual, Page: 128 / 144

Share
Download
Comdial Large Screen Display Speakerphone User Manual Download Page 128

Speakerphone Characteristics

120

Comdial

June, 03

•  In some situations, such as when either you or the distant party 

are in a noisy environment, you may have to lift your handset to 
ensure a clear conversation.

•  When both you and the distant party use speakerphones, the 

sound-activated switches can occasionally detect both voices 
simultaneously, thus blocking out both voices.

Half-Duplex Speakerphone Guidelines

•  Background noise may prevent the sound-activated switches 

from operating properly.  Avoid placing the speakerphone 
where it will detect sounds from typewriters, keyboards, 
printers, paging systems, and other equipment.

•  Speak slightly louder than normal and in a clear voice.  For the 

microphone to best detect your voice, speak within three feet of 
it and face the telephone.

•  Raising the volume of the loudspeaker makes it easier for the 

sound-activated switches in your telephone to select the distant 
party’s voice.  Lowering the volume of the loudspeaker makes it 
easier for the switches to select your voice.

•  Since the system takes several seconds to provide the best 

switching, constant sound patterns —such as elongating your 
words and playing externally-supplied must—may prevent the 
sound-activated switches from operating properly.

Note:  The speakerphone user guidelines in this section do not 
apply to the Impact SCS 8412F-** when it is operating in full-
duplex mode.  However, when the 8412F-** is in half-duplex 
mode, or in ‘speech training’ mode, the following guidelines are 
applicable.

These guidelines are also applicable to the 8412S-** whenever it 
is in speakerphone mode.

Summary of Contents for Large Screen Display Speakerphone

















































































































































Reviews:

No comments