Comdial Large Screen Display Speakerphone Page 81 User Manual Download

Page: 81 / 144

Large Screen Display Speakerphone User’s Guide

June, 03

Comdial.

•

Response Messaging

(Response Messaging)allows you to send an

LCD message to a caller who has initiated a SOHVA or intercom
call from another LCD telephone.

•

Saved Number Redial

(Saved Number Redial)redials the last

number saved

•

Service Observe

(Service Observe)allows you to monitor a

conversation or activity at another telephone in an undetected
manner.

•

Tracker Paging System

(Tracker Access)allows you to enter

tracker pager numbers, pickup a tracker page, and either enable
and/or disable a pager number.

•

Voice-Announce Block

(Voice Announce Block)blocks voice

announcements.

•

Volume Save

(Volume Save)allows the preset volume level to be

saved.

Programming of the feature access buttons may require several selec-
tions involving many LCD screens. If an abbreviation used is not
familiar to you, consult Appendix B, Display Abbreviations on page .

• To create a feature access button,

1.  SELECT OPTIONS.
2.  SELECT Programming.
3.  SELECT NEXT until the  Feature

Button option appears.

4. SELECT Feature Button.
5. SELECT the Feature Level interac-

tive button to toggle between 1 and
2.

6. SELECT one of the three options.

• Show Empty Locations - green

lights

• Show All Locations - red lights
• Feature Level

7. SELECT the button you want to assign as a feature button.

Summary of Contents for Large Screen Display Speakerphone

















































































































































Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Related manuals for Large Screen Display Speakerphone

Brands by name

Popular brands

Comdial Large Screen Display Speakerphone, User Manual

Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Related manuals for Large Screen Display Speakerphone

Brands by name

Popular brands