Comdial Large Screen Display Speakerphone Page 49 User Manual Download

Page: 49 / 144

Large Screen Display Speakerphone User’s Guide

June, 03

Comdial.

4. ADVANCED CALL HANDLING

4.1 Waiting For A Line (Queuing)

If all the lines in a line group are busy, you can place your telephone
in a queue to await an idle line.

• To queue for a line group,

1. PRESS INTERCOM.
2. DIAL the line group access code (see Line Group Access code table

on page 78 for your systems codes).

3. HEAR busy tone.
4. DIAL *6.

• If you have line appearance for a particular line and wish to

queue for it,

1. OBSERVE the busy status light (LED).
2. PRESS INTERCOM.
3. DIAL *6.
4. PRESS line button.
5. When line group is free, your telephone sounds several short tone

bursts. When you hear this, lift handset, hear dial tone, and place call.

• To cancel line queuing or line group queuing,

1. PRESS INTERCOM.
2. DIAL #6.

Summary of Contents for Large Screen Display Speakerphone

















































































































































Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Related manuals for Large Screen Display Speakerphone

Brands by name

Popular brands

Comdial Large Screen Display Speakerphone, User Manual

Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Related manuals for Large Screen Display Speakerphone

Brands by name

Popular brands