Comdial Large Screen Display Speakerphone Page 122 User Manual Download

Page: 122 / 144

Glossary

114

Comdial

June, 03

Queue

Method by which a station user waits for an available line by dialing a
code and waiting for the system to call back.

Response Messaging

Responding non-verbally to a calling station by pressing a pro-
grammed button that sends a message to the calling station’s display.

Ringing Line Preference

An automatic connection to any outside line ringing at the station
when the station handset is taken off-hook.

Ringing Tones, Personal

A telephone can be arranged to ring in one of six distinctive tones.

Saved Number Redialing

Saving a last manually dialed number for later autodialing.

Screened Call Transfer

Allows users to first announce and then transfer both line and
intercom calls from one station or group to another.

Service Observing

Class of service programming option allows users to enter an in-
progress call in an unannounced muted mode to monitor the call.

Speed Dialing

Autodialing using the keypad buttons. Speed dialing can be station
calls (personal and accessed by only one specific user) or system calls
(numbers used and accessed by anyone in the system).

Station

A single system telephone with an individual identity and feature set
assigned by the programmer.

Summary of Contents for Large Screen Display Speakerphone

















































































































































Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Related manuals for Large Screen Display Speakerphone

Brands by name

Popular brands

Comdial Large Screen Display Speakerphone, User Manual

Search results

Summary of Contents for Large Screen Display Speakerphone

Reviews:

Related manuals for Large Screen Display Speakerphone

Brands by name

Popular brands