manualshive.com logo in svg

Comdial Large Screen Display Speakerphone, User Manual, Page: 36 / 144

Share
Download
Comdial Large Screen Display Speakerphone User Manual Download Page 36

Answering Calls 

28

Comdiall

June, 03

2.8  Caller ID (Automatic Number 

Identification)

When installed by system programming, the Caller ID feature allows 
you to view incoming call numbers before you answer them. 
Incoming call numbers flash in the left half of the LCD. If the name 
of the calling party is available it will display in the second half on the 
right side of the LCD. If you answer the call, the number appears 
steady in the left half of the LCD.

 

 

The system also stores numbers that ring on your line but receive no 
answer. The system indicates that it has stored ring-no answer 
numbers by causing the programmed Caller-ID (CID) light on your 
telephone to flash. Pressing the CID button allows you to view the 
stored numbers one at a time. Pressing the programmed SAVED 
NUMBER REDIAL button causes the system to dial the displayed 
number. If the call has been returned by someone else, selecting the  T  
key reveals who returned the call. Everyone sharing your line can 
scroll through the stored numbers and choose which calls to return.

•  To scroll through ring-no answer numbers stored on your 

system (CID light is flashing),

1.  SELECT the CID button on your telephone. Your LCD will display 

the calling number, date, and time the call came in. The most recent 
call appears first in the list.

2.  SELECT the  CID button each time you wish to display the next most 

recent ring-no answer call to your line. 

3.  To dial one of the numbers in the redial queue, SELECT the SAVED 

NUMBER REDIAL button. The system will automatically dial the 
number.

Summary of Contents for Large Screen Display Speakerphone

















































































































































Reviews:

No comments