Comdial DSU and DSU II System Reference Manual Download Page 78

Page: 78 / 136

8.6

Activating The Call Forward
Outside System (CFOS) Feature

The Call Forward Outside System (CFOS) feature gives DSU II station
users the ability to forward line calls to a remote location outside the
system. CFOS remains in effect in the event of a loss of power or a
system reset.

•

To activate the CFOS feature,

1. Press INTERCOM

✳

07.

2. Press the speed dial button programmed with the target number,

—OR—

Press a line button,

—OR—

Dial 0 for the Prime line or last used line,

—OR—

Dial 1–4 Line Group number.

3. Dial desired digits 0–9 (max 16 digits)

4. Press HOLD for Pause or press TAP for Flash.

5. Press SPEAKER to end.

•

To deactivate the CFOS feature,

1. Press INTERCOM # 07.

Using The Other Telephone Features

GCA70–245

8–6 LCD Speakerphone Reference Manual

Summary of Contents for DSU and DSU II









































































































































Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands

Comdial DSU and DSU II, System Reference Manual

Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands