Comdial DSU and DSU II System Reference Manual Download Page 34

Page: 34 / 136

2.7 Setting A Night Transfer Button

Because Night Transfer is a commonly used feature, you may wish to
program a button to serve as the Night Transfer button.

•

To program a Night-Transfer Button,

1. Press INTERCOM.

2. Dial

✳ ✳

3. Press one of the programmable buttons.

4. Press INTERCOM.

5. Dial

✳

# 0 3.

6. Press SPEAKER to end.

To set the Night Transfer Of Ringing mode, simply press the Night-
Transfer button you have programmed. To return ringing to the
attendant’s station, press the Night-Transfer button again.

NOTE: When the system is in night transfer mode, the intercom light

at station 10 and station 12 will flutter with repetitive off
periods.

2.8 Setting The System Clock

You can program the system clock to maintain current date and time
information. The time and date appear on the LCD speakerphone for
display.

•

To set the system clock from the attendant’s station,

1. Press INTERCOM.

2. Dial

✳

# 0 1.

3. Dial two digits (00-99) for year.

4. Dial two digits (01-12) for month.

5. Dial two digits (01-31) for day.

6. Dial two digits (00-23) for hour.

7. Dial two digits (00-59) for minutes.

8. Press SPEAKER to end.

Programming The Attendant Features

GCA70–245

2–14 LCD Speakerphone Reference Manual

Summary of Contents for DSU and DSU II









































































































































Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands

Comdial DSU and DSU II, System Reference Manual

Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands