Comdial DSU and DSU II System Reference Manual Download Page 75

Page: 75 / 136

8.3 Displaying The Functions Of Your

Station’s Buttons (Button Query)

You can use the interactive buttons on your LCD speakerphone to
access the button query feature. With this feature, you can cause your
station’s display to show the function of each of its buttons.

•

To activate the button query feature,

1. Press OPTIONS until QUERY appears.

2. Press QUERY.

3. Press any button and read its function in your LCD speakerphone’s

display.

NOTE: Use the SHIFT to access autodial numbers that you have

stored under DSS buttons.

4. Press SPEAKER to end.

GCA70–245

Using The Other Telephone Features

LCD Speakerphone Reference Manual 8–3

Summary of Contents for DSU and DSU II









































































































































Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands

Comdial DSU and DSU II, System Reference Manual

Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands