Comdial DSU and DSU II System Reference Manual Download Page 98

Page: 98 / 136

9.1 Message Waiting Light and Messaging—continued

•

To turn on the message waiting light at an idle telephone,

1. Press MESSAGE. (For models 8012S and 8024S, press

INTERCOM, then dial

✳

3.)

2. Dial extension number of station to be alerted. The message

waiting light of called station will flash.

•

To turn off the message waiting light at a busy or idle station,

1. Press MESSAGE. (For models 8012S and 8024S, press

INTERCOM, then dial # 3.)

2. Dial extension number of station that was alerted. The message

waiting light of called station will turn off.

•

To turn off the message waiting light during message-delivering
conversation,

1. Press INTERCOM.

•

To receive a message at an alert

1. Observe flashing message waiting light.

2. Press MESSAGE. (For models 8012S and 8024S, press

INTERCOM, then HOLD.) Connection to the station that left
message is automatic.

Using Non-Verbal Messaging

GCA70–245

9–2 LCD Speakerphone Reference Manual

Summary of Contents for DSU and DSU II









































































































































Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands

Comdial DSU and DSU II, System Reference Manual

Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands