Comdial DSU and DSU II System Reference Manual Download Page 69

Page: 69 / 136

6.3 Transferring Calls – Unscreened

•

To transfer an unscreened call to another telephone
in the system,

1. Answer call.

2. Press TRANSFER/CONFERENCE (call is automatically placed

on hold).

3. Dial extension number of telephone to receive transfer or press

DSS for that extension.

4. Press SPEAKER to disconnect or hang up. Intercom party then

has the call.

NOTE: Unscreened transfers camp-on at busy telephones and wait to

be answered. Each call automatically rings the telephone as
soon as it becomes idle.

•

If a transferred call is not answered and then returns to your
telephone, you can take one of the following steps:

—

press SEND to re-transfer the call,

—

press HOLD to place the call on hold at your telephone,

—

press ANS to return to the call.

GCA70–245

Transferring Calls

LCD Speakerphone Reference Manual 6–3

Summary of Contents for DSU and DSU II









































































































































Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands

Comdial DSU and DSU II, System Reference Manual

Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands