Comdial DSU and DSU II System Reference Manual Download Page 73

Page: 73 / 136

Using The Other
Telephone Features

Chapter 8 details the features that enhance the basic operation of your
telephone. All of the features in this chapter are listed in alphabetical
order for your convenience.

8.1 Adjusting The Display Contrast

You can adjust the contrast of the display to darken or lighten it for best
viewing.

•

To adjust the display contrast,

1. Press OPTIONS.

2. Press NEXT until DISP appears.

3. Press DISP (display reads “contrast level”).

4. Press LIGHT or DARK to change contrast level

accordingly (press button once for each degree
of change desired).

5. Press SPEAKER to save the last level and end.

GCA70–245

Using The Other Telephone Features

LCD Speakerphone Reference Manual 8–1

Summary of Contents for DSU and DSU II









































































































































Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands

Comdial DSU and DSU II, System Reference Manual

Search results

Summary of Contents for DSU and DSU II

Reviews:

Related manuals for DSU and DSU II

Brands by name

Popular brands