Comdial DigiTech 7700S Series, Reference Manual

Page: 98 / 144

•
To store the LCD messages, proceed as follows:
1. Write your messages on the chart on page 10–4 (each message
can have up to 16 characters).
2. Use the letter code table on page 10–3 to assign a number to
each character.
3. Write these numbers on the chart line beside the characters in
your message.
4. Press INTERCOM.
5. Dial
✳
# 0
✳
1 2.
6. Dial a message location number (01–30).
7. If message currently exists at selected location, dial # to clear it.
8. Compose your messages by dialing the two-digit codes that
relate to the letters.
9. Dial # to save message.
10. Dial next location number, # to clear it (if necessary), two-digit
codes for the message, and # to save.
11. Repeat previous step until all messages are stored,
12. Press SPEAKER to end.
Example: Create the LCD message “TAKE MESSAGE” and program it
into message location number 3.
1. Press INTERCOM, dial ✳
#
0
✳
1 2.
2. Dial 0 3 #
.
3. Dial code numbers for message.
81 21 52 32 12 61 32 73 73 21 41 32
T A K E M E S S A G E
4. Dial # and press SPEAKER to end.
Using The Attendant Features GCA70–226
10 – 2 LCD Speakerphone Reference Manual