Comdial DigiTech 7700S Series Reference Manual Download

Page: 74 / 144

•

To use Tracker to transfer a call to a park orbit for retrieval
and transmit the call’s park orbit code and caller ID
information (if available),

1. Answer call and press TRF.

2. Dial extension number.

3. If the called station does not answer or is busy, press TRACK

(interactive button).

4. Hear confirmation beep (Tracker page accepted) or

hear busy tone (Tracker page not accepted).

5. Press SPEAKER button to end.

NOTE: Tracker parked calls will recall to your station after a

pre-programmed time-out. You can either place the call into
another Tracker page orbit or retrieve the call for servicing.

•

To retrieve a call that you parked using the Tracker option,

1. Press HOLD button to scroll your held calls.

2. Press TAP to retrieve the displayed parked call.

•

If you receive a parked call message on your Tracker pager,

1. Go to any system station.

2. Press INTERCOM.

3. Dial Tracker pager displayed orbit code (#800–#899).

4. Retrieve call.

•

To enable or disable a Tracker pager at your station,

1. Press INTERCOM.

1. Dial

✳

06 to disable,

—OR—
dial

✳

07 to enable,

2. Press SPEAKER to end.

Using The Other Telephone Features

GCA70–226

7 – 22 LCD Speakerphone Reference Manual

Summary of Contents for DigiTech 7700S Series

















































































































































Search results

Summary of Contents for DigiTech 7700S Series

Reviews:

Related manuals for DigiTech 7700S Series

Brands by name

Popular brands

Comdial DigiTech 7700S Series, Reference Manual

Search results

Summary of Contents for DigiTech 7700S Series

Reviews:

Related manuals for DigiTech 7700S Series

Brands by name

Popular brands