Comdial DigiTech 7700S Series Reference Manual Download

Page: 117 / 144

10.11 Transferring The Attendant Calls

To The Alternate Attendant Telephone

The system installer can arrange for another telephone to serve as an
alternate attendant location. You can transfer all calls that would ring at
your telephone to this alternate attendant telephone whenever you wish
to do so.

•

To choose an alternate attendant’s station to receive your
forwarded calls,

1. Press INTERCOM.

2. Dial

✳

0 4.

3. Dial your station number, then press #.

4. Dial the number of the alternate attendant station, then press #.

5. Press SPEAKER to end.

•

To transfer calls that would normally ring at your station to
the alternate attendant you’ve selected,

1. Press the installer-programmed ALTERNATE button. (Your

LCD will display “Alternate” and the extension number of the
alternate attendant.)

•

To return ringing of calls to your telephone,

1. Press the installer-programmed ALTERNATE button again.

GCA70–226

Using The Attendant Features

LCD Speakerphone Reference Manual 10 – 21

Summary of Contents for DigiTech 7700S Series

















































































































































Search results

Summary of Contents for DigiTech 7700S Series

Reviews:

Related manuals for DigiTech 7700S Series

Brands by name

Popular brands

Comdial DigiTech 7700S Series, Reference Manual

Search results

Summary of Contents for DigiTech 7700S Series

Reviews:

Related manuals for DigiTech 7700S Series

Brands by name

Popular brands