2.20 Supporting The Tracker Paging System
The optional Tracker paging system allows you to send alpha/numeric or numeric-only messages
to the Tracker Pagers assigned to a station extension number. The type of message that the
system delivers is dependent on the Tracker Pager model being used. Tracker’s paging option
requires only one connection to the digital telephone system; however, you will need to take
several programming steps to make it operational.
•
If you use station 10 programming to configure the system, install the Tracker base station
to the common equipment cabinet’s RS232 data port A. Then, after you have completed the
installation, take the programming action detailed in section 3.17.
•
If you use a video display terminal (VDT) to configure the system, it is connected to the
RS232 data port A and you must take programming action before you install Pager. Refer
to IMI66-094, DSU Video Display Terminal Programming Manual if you need more detail,
and follow the installation/programming sequence detailed below.
1. Use the VDT to do the following:
A. If this is a new installation, master clear the system:
1. From the main menu, select System C.O.S. and press Enter.
2. From the System C.O.S. menu select System Defaults and press Enter.
3. From the System Defaults menu, select Master Clear, press Enter, type Y to accept
master clear, and press ENTER to return to System C.O.S. menu.
—OR—
If this is a software upgrade installation, default all system data.
1. From the main menu, select System C.O.S. and press ENTER.
2. From the System C.O.S. menu select System Defaults and press ENTER.
3. From the System Defaults menu, select Default System Data, press ENTER, type Y
to accept default, and press ENTER to return to system C.O.S. menu.
B. From the System C.O.S. Programming menu, select System Operations
C. From the System Options menu, select Tracker and then select the enable option.
D. Return to the main programming menu and select Station C.O.S.
E. From the Station C.O.S. Programming menu, select Miscellaneous Features
Programming.
F. From the Miscellaneous Features menu, select Display Pager and then enable the Tracker
Pagers for the stations.
Digital Telephone System
IMI66–107
2 – 76 Installing The DSU
Summary of Contents for Air Impact DSU
