37
WORK
36.
BEGINNING TO WORK (Innova 60B versions)
To start working, do as follows:
1.
Make all the checks listed in “PREPARING TO WORK”.
2.
Sit on the driver’s seat.
3.
Turn the main switch key (01) clockwise by a quarter of a turn to "I". The instrument panel
display will immediately come on.
When the display comes on, three screens appear in sequence. The first screen displayed, on
the top line, indicates what type of hour meter has been set; in this case it's a total hour meter
(to visualise a different type - for instance partial - contact the specialist personnel or COMAC-
trained personnel). The bottom line shows the “service” setting (in this case there is no setting).
The second screen displays what battery technology has been set for machine operation; in this
case it is lead batteries (to set another type of battery - for instance gel - contact the qualified,
COMAC-trained personnel).
The third and last screen (known as “work”) visualises the battery charge status and the total
functioning time. When the batteries supplied are fully charged, the upper line contains 8 light
indicators that represent a battery. As the batteries gradually run down, the indicators go out
and, with the batteries completely run down, only the battery outline flashes. The bottom line
indicates the hours and minutes of functioning. The flashing “:” symbol indicates that the hour
meter is counting the machine functioning time.
4.
Pull the knob (04) down and adjust the amount of solution desired.
5.
Lower the brush head until it comes into contact with the floor, rotating the lever (05) in a
clockwise direction.