33
PREPARING TO WORK
34.
PREPARING TO WORK (versions without CDS)
Before beginning to work, it is necessary to:
1.
Make sure the recovery tank is empty, otherwise empty it completely.
2.
Check that the quantity of detergent solution in the solution tank is correct for the type of work
to be carried out; if not, refill the solution tank. View the level tube (01) on the front left of the
seat.
3.
Check that the state of the squeegee rubber is suitable for work, if not have them maintained
(read the sections “CLEANING THE SQUEEGEE RUBBER” or else “REPLACING THE
SQUEEGEE RUBBER”).
4.
Check that the state of the disc brush/brushes (Innova 60-65-75-85-100 B versions) or the
cylindrical brush (Innova70 S versions) are suitable for work, if not have them maintained
(read sections “CLEANING THE BRUSH” or else “REPLACING THE BRUSH”).
5.
Grip the handle on the right side of the recovery tank.
6.
Lift the recovery tank until it hooks to the end of the safety catch.
7.
Check that the connector of the general system (02) is connected to the battery connector (03),
if not, connect them together.
8.
Grip the handle on the right side of the recovery tank.
9.
Lower the recovery tank as far as the working position.
2
3