Colorjet AURAJET II Series, Installation And Troubleshoot Manual, Page: 50 / 80

Page | 49
AuraJet Series II
Feed Adjustment
Follow the Menu
→
Adjustment
→
Feed Adjustment path. The following screen appears, as shown below:
Fig 58: The Feed Adjustment Screen
Select the Pass Number option from the Feed Adjustment screen (Refer to Fig 58) for which adjustment is to be
done. After selecting the pass number, return back to the above screen (Refer to Fig 58) and then select the media
type. On selecting the media type, the following screen appears, as shown below:
Fig 59: The Pass Correction Value Screen
Select the Print (High) option to execute the print and then select the Value option from the above screen (Refer
to Fig 59). Enter the correction value and verify the result by using the Print (High) option. The correction value
can be adjusted up to two decimal places.
Note : When either of the three alignments is selected, need to select high speed/precision and VSD 3 mode,
thereafter print screen will appear.