Page | 39
AuraJet Series II
The head interleave test and position of print head are shown in the image below:
Let’s see the actual result of the head interleave test.
The head interleave test result is shown in the below figure:
In the above figure, the base reference color is
Black
(best known as K). The test result signifies the position of
other colors (Cyan, Magenta, and Yellow) with reference to the K. If the print head is not parallel with the head
plate (viewed from the top), then the base color line will not exactly align with the other colors and it looks broken.
Note
: If you want to get the correct output from the head interleave test, kindly carefully observe the yellow color
with reference to the black color.
Fig 43: The Head Interleave Test
Fig 42: The Head Interleave Test and Head Position in it
Top View of the Print Head
Summary of Contents for AURAJET II Series
Page 1: ......
Page 18: ...Page 17 AuraJet Series II Step 17 Install the sublimation kit If applicable as shown below...
Page 79: ......
