background image

 

ii 

Copyright, Trademarks, Patents 

The software described in this document is furnished under license, and may be used or copied 
only in accordance with the terms of such license and with the inclusion of the copyright notice 
shown on this page. Neither the software, this document, nor any copies thereof may be 
provided to or otherwise made available to anyone other than the licensee. Title to and 
ownership of this software remains with Cognex Corporation or its licensor. Cognex 
Corporation assumes no responsibility for the use or reliability of its software on equipment that 
is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either 
express or implied, regarding the described software, its merchantability, or its fitness for any 
particular purpose. 

The information in this document is subject to change without notice and should not be 
construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for 
any errors that may be present in either this document or the associated software. 

Copyright © 2000-2001 Cognex Corporation. 
All Rights Reserved. 

This document may not be copied in whole or in part, nor transferred to any other media or 
language, without the written permission of Cognex Corporation. 

Cognex P/N 590-6372 

 

Summary of Contents for In-Sight 1010





































Reviews: