Coffee Queen CQube LF04 Maintenance Manual Download | Manualshive

Page: 39 / 58

background image

CQUBE SERIES

39

Grinder EK-7

MAINTENANCE AND CARE

Periodic maintenance

Each month: clean outlet, grinding house and grinding discs.
Monthly cleaning of grinder using GRINDZ cleaning tablets (item no. E1001001).

Bean Stop

Grinder
Grinder outlet
Grinder Adjustment Wheel
Fixation Screw

Bean Hopper

Safety

Please read and observe the following service instructions carefully. Non-
observance can result in damage to the grinder as well as in healththreatening
risks for the user.
All installations shall been done by an qualifi ed personnel.

Symbols

Safety instruction:

In case of non-observance, extreme risk of accidents exists.

General instruction:

In case of non-observance, the device can become damaged or optimum
operation not be guaranteed.

Safety instructions

The grinder is only allowed to be used to grind whole coffee beans. Ground

coffee is never allowed to be fi lled into the input-shaft.

Do not carry out any modifi cations or changes on the grinder. In case for

non-observance, the manufacturer shall be liable for resulting damain no case
whatsoever.

Never put your fi ngers or objects into the rotating grinding mechanism inside

the input-shaft.The grinder must not be operated when turning parts are
accessible!

Make sure, that the power cannot be turned on when working on the built-in

grinder!

In order to avoid damages, do not use power tools or cordless electric

screwdrivers for any work on the grinder.

«
...
37
38
39
40
41
...
»

Summary of Contents for CQube LF04



























































Reviews:

No comments

Related manuals for CQube LF04

Brand: 3M Pages: 12

Ice Cream Maker

Brand: Back to Basics Pages: 32

Brand: Baratza Pages: 16

Brand: Baratza Pages: 6

Brand: Baratza Pages: 5

Brand: Baratza Pages: 13

Brand: Baratza Pages: 2

Brand: Baratza Pages: 24

Brand: Baratza Pages: 12

Brand: Acopino Pages: 42

Brand: weasy Pages: 97

Brand: U-Line Pages: 45

Brand: Fagor Pages: 17

Maxx Ice UIM225NB

Brand: UniFlow Pages: 56

Brand: DeLonghi Pages: 6

Brand: Russell Hobbs Pages: 72

Brand: Cime Pages: 32

Brand: Gaggia Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands