12
Read this instruction booklet carefully before
installing and using the appliance. This is the only
way to ensure the best results and maximum safety
for the user.
DESCRIPTION
(see page 3)
The terminology below will be used repeatedly on the
following pages.
1
Cup warmer plate
2
Steam knob
3
Water level indicator
4
Power cable
5
Water tank
6
Cappuccino maker
7
Steam tube
8
ON/OFF button
9
Coffee/hot water button
10
Steam button
11
ON/OFF button indicator light
12
Preheating completed indicator light
13
Steam selected indicator light
14
Coffee filter with frother
15
Coffee filter holder
16
Presser
17
Boiler outlet
18
Pod filter (if fitted)
19
Pod filter holder (if fitted)
20
Measure
21
Drip tray
22
Cup grid
23
Cup grid edge (certain models only)
SAFETY WARNINGS
• This appliance is designed to "make espresso coffee"
and "heat drinks". Use with care to avoid scalds
from the water and steam jets or through incorrect
use.
• Never touch hot parts.
• After removing the packaging, make sure the
product is complete. If in doubt, do not use the
appliance and contact a professionally qualified
person.
• The packing elements (plastic bags, polystyrene foam,
etc.) should be kept out of reach of children as they are a
safety hazard.
• This appliance is intended for domestic use only. Any
other use is considered improper and thus
dangerous.
• The manufacturer cannot be held responsible for any
damage caused through incorrect, wrong or
unreasonable use.
• Never touch the appliance with wet or damp hands
or feet.
• Never let children or unfit persons use the appliance
without supervision.
• Never allow children to play with the appliance.
• Should the appliance break or not function correctly,
turn it off and do not tamper with it. For all repairs,
contact authorised service centres only and insist on
the use of original spare parts.
Failure to respect the above could reduce the safety
of the appliance.
• The power cable for this appliance must not be
replaced by the user as this operation requires the
use of special tools. In the event of damage, contact
an authorised service centre only to avoid all risks.
INSTALLATION
• Place the appliance on a work surface away from
taps and sinks.
• Check that the voltage of the mains power supply
corresponds to the value indicated on the appliance
rating plate. Connect the appliance to an efficiently
earthed electrical socket with a minimum rating of
10A only. The manufacturer declines all liability for
any accidents caused by the absence of an efficient
earth system.
• If the plug fitted to the appliance does not match the
power socket, have the socket replaced with a
suitable type by a qualified electrician.
• Never install the appliance in environments where
the temperature may reach 0°C or lower (the
appliance may be damaged if the water freezes).
GB
