Manitowoc Ice
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
000013291
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
Page 1 of 2
Rev 00
COMPRESSOR REPLACEMENT
I1406 SERIES
1. Disconnect the power to the ice machine at the electrical 6. Unbraze the suction line at the compressor port. Unbraze
panel. (pushing the power button to the off position the discharge port at the compressor.
will not disconnect line voltage). Unbraze the bottom joint at the compressor discharge port.
2. Remove all the panels (top, front left, and right sides). Cut the tubing when replacing filter drier.
3. Recover all refrigerant from the ice machine.
Do not unbraze the filter drier.
4. Remove the right rear back panel and top rail.
Note:
(
Orientation is done while facing the front of the ice machine)
Note: When replacing the compressor in a Remote
Ice Machine
;
be sure to unbraze the suction
and process
port
at the compressor, replace
the filter drier. Cut tubing to replace the
filter dryer. Do not unbraze filter drier.
Remember that there are four points of
recovery on a remote.
5. Remove the wiring or plug from the compressor terminals.
7. Remove the compressor from the ice machine. Make
sure compressor ports are crimped and brazed shut.
Unbraze
Unbraze
I1406
Compressor
plug location
I1406
Compressor
position
Filter Drier
Cut the tubing
4 Recovery
Points
