CQUBE SERIES
21
Detailed cleaning instructions
Clean grinder 1/2 for CQube series
CLEANING PROGRAM
If machine have two grinders, follow same procedure but use
button
instead (Grinder 2)
(See fi g. B)
Grinder 1= left grinder
Grinder 2= right grinder
Note
Insert technical service card
Step to
Clean Machine
Press Enter
or press
Clean Machine
Cleaning Hot Key
appears on the display
Open the machine door.
Remove the brewer from its position and close bean stop in bottom of the
bean hopper.
Start grinder by pressing button
(Grinder 1), this is a “Push and Hold”
function, the grinder will run as long as the button is pressed.
(See fi g. A)
Run grinder until no powder comes out of the grinder outlet, approx 10sec.
Remove the bean hopper and pour out the remaining coffee beans.
Reassemble bean hopper and fill with a cap GRINDZ cleaning tablets and re-
open bean stop. (See fig.C)
Start the grinder again by pressing button
approx 10sec.
Run until no more cleaning powder come out of the grinder.
Re
fill the bean hopper with fresh coffee beans.
Reassemble the brewing mechanism.
Close the door and remove technical service card to return to normal mode.
Make one cup of brew coffee and throw it away.
Tips: Keep a cup
under the grinder
outlet during the
cleaning process.
A
B
Cleaning with
grindz cleaning
tablets, Every
month
(Product No.
E1001001)
fig.C
