From accessory to telecoil
To move to the in-built telecoil when an accessory is attached, push
both the Increase and Decrease buttons at the same time, for a few
seconds, until a T shows on the display.
From telecoil to accessory
To move back to the accessory, push both the Increase and Decrease
buttons at the same time, for a few seconds, then repeat this until
you can hear with the accessory again.
From accessory to microphone
Alternatively you may wish to move from using your accessory, to
using your microphone only, while leaving the accessory attached.
When using an accessory, to move to the microphone only setting,
push both the Increase and Decrease buttons at the same time, for
a few seconds, then do this again, until an M shows on the display
(except when using a lapel microphone) or you hear sound through
the microphone.
From microphone to accessory
To move back to the accessory, push both the Increase and Decrease
buttons at the same time, for a few seconds, until you can hear the
accessory again.
Make sure your finger presses both sides of the button area.
Locking the buttons
The button lock can be used to prevent children from changing
the controls or to avoid accidental button presses changing your
processor settings.
To lock or unlock the buttons, push both the Select and Decrease
buttons for a few seconds.
The display will briefly show +L to indicate the buttons are locked.
© Cochlear Limited 2014
Nucleus Freedom User Manual - 35
Us
in
g
N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd 35
10/07/2014 11:12:15 AM
