Attaching and removing the coil
If you plug the coil cable into the Processing Unit when your
processor is turned on, your processor may turn off. If this occurs,
hold down the Select button to turn your processor back on, that is,
until you either hear sound or the display shows.
A secure fit using the Mic Lock
™
A Mic Lock can be used to hold the Processing Unit in place behind
the ear.
The tube Mic Lock can be used on the BTE Controller, the Mini BTE
Controller and
the Bodyworn Cable. The stirrup Mic Lock is for use
with the Bodyworn Cable.
To fit the Mic Lock:
1. For the tube
Mic Lock, thread the earhook and Processing Unit
through the Mic
Lock tube and move it down the unit until it fits
firmly.
For the BTE or Mini BTE Controller, position the Mic Lock between
the buttons, so the transparent band covers the display. Alternatively,
clip the stirrup Mic Lock into the two holes towards the base of the
Bodyworn Controller shoe.
2. Put your processor on your ear.
3. Bring the tubing around to the front of your ear and up to the
earhook. Either sized earhook can be worn with the Mic Lock.
If the tube Mic Lock does not feel comfortable, for a better fit, rotate
the band around the base of your processor.
4.
Hold your processor firmly in place, and determine where the
tubing should be cut.
© Cochlear Limited 2014
Nucleus Freedom User Manual - 15
We
a
ri
n
g
N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd 15
10/07/2014 11:12:05 AM
