manualshive.com logo in svg

Cochlear Nucleus Freedom Babyworn, User Manual

Share
Download
Cochlear Nucleus Freedom Babyworn User Manual Download Page 55

 

Dry aid kit

 

Drying pack

To store your processor overnight, you may either leave your 

battery/batteries in the controller, or remove the battery holder from 

the controller and place it separately, with the batteries in the holder, 

in the drying kit.

�

 

Keep the drying chemical material away from young children. 

Swallowing this material can cause serious internal injuries.

For long-term storage, remove the batteries from the controller. 

Remember to store them separately, to avoid them from shorting 

each other. 
You can also buy dry aid kits or drying packs for use with your 

processor, from an electronics store or pharmacy. 

General cleaning

Keep battery contacts clean: use a soft brush to gently clean the 

battery contacts. Take care not to apply force that may damage the 

contacts. 
If batteries are dirty, wipe them with a clean dry cloth. Be careful to 

keep batteries dry and free from moisture. 
Keep the contacts clean where the Processing Unit and either the 

BTE Controller, Mini BTE Controller or Bodyworn/Babyworn Cable 

Shoe connect: use a swab dampened with medicinal alcohol to gently 

clean the contacts.
Clean the microphone protector daily with a soft brush if possible.
Use a soft, clean, dry cloth to clean the device. Regular cleaning 

prevents dirt from building up. Do not use harsh chemicals, cleaning 

solvents, or strong detergents to clean the device.

© Cochlear Limited 2014 

Nucleus Freedom User Manual - 55

C

a

re

N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd   55

10/07/2014   11:12:27 AM

Summary of Contents for Nucleus Freedom Babyworn

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands