manualshive.com logo in svg

Cochlear Nucleus Freedom Babyworn, User Manual, Page: 30 / 80

Share
Download
Cochlear Nucleus Freedom Babyworn User Manual Download Page 30

Controlling microphone sensitivity

The microphone sensitivity controls the softest level of sound picked 

up by the microphone. The recommended level is 12.
If sensitivity changes are enabled, you can:
• 

Decrease the sensitivity to reduce background noise in noisy 

situations

• 

Increase the sensitivity to hear very soft sounds in quiet 

situations

To change the microphone sensitivity:

BTE, Mini and Babyworn

1.  Briefly push either 

the Increase or 

Decrease button.

The display shows the 

current sensitivity level.

2.  Continue pushing 

until you reach the 

sensitivity level you 

want.

Bodyworn

1.  Briefly push either 

the Increase or 

Decrease button.

The display shows the 

current sensitivity level.

2.  Continue pushing 

until you reach the 

sensitivity level 

you want.

If you find you often set the sensitivity higher or lower than 12, 

consult your clinician. 

 30 - Nucleus Freedom User Manual

 

© Cochlear Limited 2014

C

h

a

pt

e

r 1

Us

in

g

N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd   30

10/07/2014   11:12:14 AM

Summary of Contents for Nucleus Freedom Babyworn

















































































Reviews:

No comments