Cochlear Nucleus Freedom Babyworn User Manual Download Page 42

Page: 42 / 80

Remove the battery

rack.

Remove the used

batteries.

Insert the new batteries.

Replace the battery

rack.

Turn on your processor.

If you have a BTE Rechargeable Battery System, refer to your user

instructions that come with the system. The BTE Rechargeable

Battery fits inside the BTE Controller.

�

Dispose of used batteries in accordance with your local

regulations. Never dispose of batteries in fire.

Rechargeable BTE Controller battery (A25)

A rechargeable lithium-ion battery can be used with the BTE

Controller in place of the standard battery holder (three Zinc

Air). Detailed instructions for use are provided with the Nucleus

Freedom BTE Rechargeable Battery (A25) and Nucleus Freedom

BTE

Recharger.

Always use the BTE Recharger available from Cochlear Limited

to recharge the BTE Rechargeable Battery. A power supply is also

supplied to connect the BTE Recharger to mains power or the power

outlet. Cochlear

™

also supply a charger that can be connected to a 12

volt power supply such as a car outlet.
To get the longest battery life, always fully charge the rechargeable

battery before you use it. The battery is supplied partially charged

and has a shelf life of two years. It is not recommended to store fully

charged batteries for longer than three weeks.

42 - Nucleus Freedom User Manual

tte

N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd 42

10/07/2014 11:12:21 AM

Summary of Contents for Nucleus Freedom Babyworn

















































































Search results

Summary of Contents for Nucleus Freedom Babyworn

Reviews:

Related manuals for Nucleus Freedom Babyworn

Brands by name

Popular brands

Cochlear Nucleus Freedom Babyworn, User Manual

Search results

Summary of Contents for Nucleus Freedom Babyworn

Reviews:

Related manuals for Nucleus Freedom Babyworn

Brands by name

Popular brands