manualshive.com logo in svg

Cochlear Nucleus Freedom Babyworn, User Manual

Share
Download
Cochlear Nucleus Freedom Babyworn User Manual Download Page 63

Other Information

Storing your personal details

For future reference, keep this manual in a safe place.

Your processor stores your first name, last name, implant type, MAP 

identifier and recipient identifier. 

This allows you to: 
• 

Attend another clinic for programming if you need to

• 

Identify your processor as your own

When your clinician opens the program they have access to this 

information. This information can only be accessed in a programming 

session.

Technical information

Specifications

Physical configuration

Modular architecture: The BTE Controller, Mini BTE Controller, 

Bodyworn Cable and Babyworn Cable are detachable from the 

Processing Unit, enabling you to connect the Processing Unit to a 

different controller.
Dual microphone architecture: The microphones are protected by a 

replaceable hydrophobic mesh.
The connection between the Processing Unit and any controller (or 

Bodyworn or Babyworn Cable Shoe) is splash proof.
Processing Unit, BTE Controller, Mini BTE Controller and Bodyworn 

Controllers are protected against solid foreign objects greater than 

or equal to 1.0mm diameter, and protected against splashing water 

(IP44).

© Cochlear Limited 2014 

Nucleus Freedom User Manual - 63

N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd   63

10/07/2014   11:12:28 AM

Summary of Contents for Nucleus Freedom Babyworn

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands