Cochlear Nucleus Freedom Babyworn User Manual Download Page 8

Page: 8 / 80

BTE wearing option

Mini BTE wearing option

Processor with BTE or Mini BTE
Controller

Both the BTE and Mini BTE Controllers are normally attached to

the Processing Unit and worn behind the ear. The Mini BTE offers a

smaller two Zinc Air battery option than the standard BTE, providing

a smaller and lighter wearing option.

Processor with Bodyworn Controller

The Bodyworn Controller is worn separately to the Processing Unit

and attached with the Bodyworn Cable. The large screen makes

it easy to view and change settings for adult users. The Bodyworn

Controller is easily interchangeable with the BTE and Mini BTE

Controllers.

Processor with Babyworn

™

The BTE with the Babyworn Wearing System provides choice in the

way children of any age wear the BTE Controller. The reduced BTE

size and weight improve comfort on the ear and the BTE Controller

provides a smaller wearing option than the Bodyworn Controller.

8 - Nucleus Freedom User Manual

rvi

N206305-206317_4.01_Freedom_User_Manual_ENG_CAP_SC.indd 8

10/07/2014 11:12:02 AM

Summary of Contents for Nucleus Freedom Babyworn

















































































Search results

Summary of Contents for Nucleus Freedom Babyworn

Reviews:

Related manuals for Nucleus Freedom Babyworn

Brands by name

Popular brands

Cochlear Nucleus Freedom Babyworn, User Manual

Search results

Summary of Contents for Nucleus Freedom Babyworn

Reviews:

Related manuals for Nucleus Freedom Babyworn

Brands by name

Popular brands