Cobra 57959 Owner'S Manual & Safety Instructions Download Page 8

Page: 8 / 101

USER MANUAL

Safety Instruction

Please carefully read the following safety instruction so as to avoid personal injuries and prevent

the equipment and other connection devices from being damaged.

1. Power sources (note: please use the power supply attached or specified by the

manufacturer)

Never operate the equipment by using unspecified power supply.

2. Never push any objects through the openings of WIRELESS NVR

Never push any objects through the openings of WIRELESS NVR so as to avoid electric shock

or other accidents.

3. Do not put the equipment in the dusty field

Do not put the equipment in the dusty field.

4. Do not place the equipment under the rain or humid environment

Do not place the equipment under the rain or humid environment like basement. If the

equipment is accidentally in contact with water, please unplug the power cable and

immediately contact your local dealer.

5. Keep the surface of the equipment clean and dry

Use soft and damp cloth to clean the outer case of WIRELESS NVR (do not use liquid aerosol

cleaners)

6. Do not operate if any problems are found

If there are any strange smell or sound from WIRELESS NVR, unplug the power cable and

contact the authorized dealer or service center.

7. Do not try to remove the upper cover

Warning

: Do not remove the cap of WIRELESS NVR so as to avoid electric shock.

8. Handle with care

If WIRELESS NVR does not work normally because of hitting on the hard object, please

contact the authorized dealer for repair or replacement.

9. Use standard lithium battery (Note: Use the batteries attached or specified by the

manufacturer)

Summary of Contents for 57959






































































































Search results

Summary of Contents for 57959

Reviews:

Related manuals for 57959

Brands by name

Popular brands

Cobra 57959, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for 57959

Reviews:

Related manuals for 57959

Brands by name

Popular brands