Cobra 57959 Owner'S Manual & Safety Instructions Download Page 97

Page: 97 / 101

USER MANUAL

After all settings are completed, click Save to save the information. When the device is connected,

the app will switch to real-time display.

1 channel display

4 channel display
6 channel display
8 channel display
9 channel display
16 channel display

NOTE

: The app displays up to 16 channels in one screen

interface, you can slide the screen to move to the next screen to
view other 16 channels, a total of 80 channels can be displayed.

Capture: Capture the image of the selected channel

screen, save it in the APP file list, and download the captured
picture to the mobile phone in the file list.

Record: Record the selected channel, save it in the APP

file list, and download the recorded video to the mobile phone in
the file list.

Audio: turn on or off the sound.

Intercom: Two-way device intercom

(if your NVR supports).

PTZ Control (if your IPC supports).
Close channel: Press and hold the video image, this icon will appear at the top of the w

indow, drag the video to this icon to close the video preview.

Summary of Contents for 57959






































































































Search results

Summary of Contents for 57959

Reviews:

Related manuals for 57959

Brands by name

Popular brands

Cobra 57959, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for 57959

Reviews:

Related manuals for 57959

Brands by name

Popular brands