Cobra 57959 Owner'S Manual & Safety Instructions Download

Page: 56 / 101

USER MANUAL

Click once or long press the left button of your mouse on the arrow to adjust the size and position, or
you can scroll the wheel of the mouse to adjust. Click the right button of your mouse to exit, and click

Apply

to save your modifications.

Cursor Hidden Delay

: Click the drop-down menu to select the time your WIRELESS NVR will hide the

mouse cursor when idle. You can also disable this by selecting “OFF”.

Cursor Acceleration

: To adjust the speed to move the mouse cursor.

Transparency

: Click and hold the slider left or right to change how transparent the Menu Bar and Main

Menu will appear on-screen.

4.6.2 Multi-user Management

This menu allows you to configure the user name, password and user permission.

Scale:

To adjust the size of the displayed

screen by scale.

X Offset:

To move the displayed screen

to left or right.

Y Offset:

To move the displayed screen

to up or down.

Summary of Contents for 57959






































































































Search results

Summary of Contents for 57959

Reviews:

Related manuals for 57959

Brands by name

Popular brands

Cobra 57959, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for 57959

Reviews:

Related manuals for 57959

Brands by name

Popular brands