Chapter 3: Operation
58
AVIATOR Wireless Handset menus
To create a new Wireless network profile
Normally a new profile is automatically created when you connect to an
access point. If needed, you can define a profile for an access point that is
not currently within reach.
To create a new Wireless network profile,
do as follows:
1. From the Wireless network list, select
Options
(left select).
2. Select
Manage
.
3. Select
Add profile
.
4. Type in the SSID of the access point.
5. Select
OK
.
A new profile is now created
6. Enter the security information for the
access point. For further information, see
To see memory usage in the list of Wireless network profiles
To see the number of stored profiles and
the maximum allowed number of profiles,
do as follows:
1. From the Wireless network list, select
Options
(left select).
2. Select
Manage
.
3. Select
Memory usage
.
Summary of Contents for AVIATOR 200
