COBHAM AVIATOR 200, User Manual

Page: 63 / 126

Chapter 3: Operation
AVIATOR Wireless Handset menus 53
3333
Oper
ation
Status
In the Status section you find the serial number of the AVIATOR Wireless
Handset and the network settings. Use this menu to display the software
version of the AVIATOR Wireless Handset.
To view status for the handset, do as follows:
1. From the main menu, select
Status
.
2. Select
Phone identification
to see
the serial number of the AVIATOR
Wireless Handset.
3. Select
Network information
to see:
• DHCP Enabled/Disabled
• IP address
• Subnet mask address
• Default gateway
• Physical address (MAC)
4. Select
Software version
to see the
version of the AVIATOR Wireless Handset software.
5. Select
Legal information
to see the FCC ID of the handset.
Network
To connect the AVIATOR Wireless Handset to the wireless
network
If the handset has been connected to the wireless access point before, it
will automatically attempt to establish a connection as soon as the access
point is within reach.
Note The Wireless network menu described in the following sections is
only available in the wireless handset. For the wired handset, go to
To select the IP address mode on page 59.