COBHAM AVIATOR 200, User Manual

Page: 74 / 126

Chapter 3: Operation
64 AVIATOR Wireless Handset menus
To set up the display
You can customize the following items in the display:
• Active backlight can be adjusted from 10 to 100 percent. The backlight
is on for 15 seconds after the last key press.
• Standby backlight can be adjusted from 0 to 50 percent and cannot be
set higher than the current Active backlight
• Screensaver, you can select whether the AVIATOR Wireless Handset
should use a screen saver when it is not used for one minute.
• Transparency can be selected.
• Automatic day/night mode can be selected. This automatically gives
you optimum display light conditions, also for operation in low light
areas. If you do not want to use automatic activation, deselect it. You
can still start it manually from the Main Options menu when needed.
For further details see
To use night mode on page 45.
To set up the display settings, do as follows:
1. From the
Settings
menu, select
Display
.
2. Move to the setting you want to change.
3. For the backlight settings, use the keys

and

to change the percentage.
4. For the remaining settings, select
Edit
to
and select or deselect the item.
Note Use the down key to scroll down
to Automatic Day/night mode.