COBHAM AVIATOR 200 User Manual Download Page 17

Page: 17 / 126

Chapter 2: Getting started

Getting started with the AVIATOR Wireless Handset

2222

etting star

ted

To charge the AVIATOR Wireless Handset using the cradle

Place the AVIATOR Wireless Handset in the cradle with the display facing
up. The handset automatically starts the charging process.

Indications during charging process

A message appears briefly in the display, the
AVIATOR Wireless Handset makes a sound
and the battery icon is animated to show
that the battery is charging.

Below are examples of the display when the
handset is off and when it is in screensaver
mode while charging the battery.

Handset off (animated.
The icon is turned off after
a while, but reappears
when a key is pressed.

Screensaver mode

Summary of Contents for AVIATOR 200































































































































Search results

Summary of Contents for AVIATOR 200

Reviews:

Related manuals for AVIATOR 200

Brands by name

Popular brands

COBHAM AVIATOR 200, User Manual

Search results

Summary of Contents for AVIATOR 200

Reviews:

Related manuals for AVIATOR 200

Brands by name

Popular brands