COBHAM AVIATOR 200 User Manual Download Page 34

Page: 34 / 126

Chapter 2: Getting started

AVIATOR Wireless Handset keypad and display

Icons in the display

The below table explains the icons in your display.

Icon

Meaning

Wireless handset (used together with signal strength
and battery status).

SwiftBroadband unit connected (used together with
signal strength and battery status if relevant).

Signal strength for wireless handset and/or for
SwiftBroadband unit.

Battery status for wireless handset and/or for
SwiftBroadband unit.

The handset is ready for making calls.

The handset is not ready for making calls.

Active alarm in SwiftBroadband unit.

Incoming call - not yet answered (the handset is
ringing).

Incoming call in progress.

Outgoing call - not yet answered.

Summary of Contents for AVIATOR 200































































































































Search results

Summary of Contents for AVIATOR 200

Reviews:

Related manuals for AVIATOR 200

Brands by name

Popular brands

COBHAM AVIATOR 200, User Manual

Search results

Summary of Contents for AVIATOR 200

Reviews:

Related manuals for AVIATOR 200

Brands by name

Popular brands