Chapter 2: Getting started
14
Establishing a connection
To enter user name and password in the SwiftBroadband unit
To match the AVIATOR Wireless Handset with the SwiftBroadband unit you
must enter the local number and password for each AVIATOR Wireless
Handset in the web interface of the SwiftBroadband unit.
To set up the SwiftBroadband unit, do as follows:
1. Connect a computer to the LAN interface of the SwiftBroadband unit
and start up your browser.
2. In the address bar, enter
ut.bgan
or the IP address for the
SwiftBroadband unit. The default IP address is 192.168.0.1.
The web interface opens.
3. Select
SETTINGS > IP handsets
.
4. Locate the local number that matches the user name (local number) of
your handset and click
Edit
.
5. Enter the same password you entered in the handset.
When the terminal and the handset have recognized each other, a
Configure
link appears next to the new handset in the web interface of
the terminal. Click the
Configure
link to open the internal web server of
the AVIATOR Wireless Handset. For information on the web server, see
Summary of Contents for AVIATOR 200
