CNET CWR-935M, User Manual

Page: 275 / 276

275
6. Q: The wireless interface of WinXP is not compatible with 3.5G server router’s WEP interface.
A: The default WEP of WinXP is Authentication Open System – WEP , but 3.5G server router only
has Pre-Shared Key – WEP . Please change WEP of WinXP to Pre-shared Key – WEP .
9.7 Support
1. Q: What is the maximum value for 3.5G server router to support IP address?
A: 3.5G server router supports 253 IP addresses under NAT mode.
2. Q: Is this Router compatible on different platform?
A: It is compatible to any platform supports Ethernet and TCP/IP.
9.8 Other
1. Q: I always get disconnected on PPPoE mode.
A: Games, music, and antivirus software might send packets to cause the disconnection. You can
close the programs, or you can set the idle time to 0.
2. Q: If there is a DHCP server in local network already, what should I do?
A: Two DHCP servers located on the same network might cause problems. In this case, please
turn off the DHCP server on 3.5G server router and setup your computer manually.
3. Q: What is purpose for Extend SSID of 3.5G server router on Router and AP mode?
A: 1. The Router and AP mode use wired connection to link to the Internet. The SSID can let
wireless users search for this router by using site survey function. The Extend SSID is used to
extend the range of other access points. Wireless Users can connect to the access point by just
inputting its SSID.
3. Wi-Fi AP mode uses Wireless to connect to the Internet. The SSID is from connecting Access
Point. The extend SSID can let wireless users search for this router by using site survey
function.