CMCO YaleERGO 1500, Translated Operating Instructions

Page: 24 / 96

24
©
2016 Columbus McKinnon Industrial Products GmbH
Only fit load chains which have been approved by the manufacturer. Non-compliance with this
specification will render the legal warranty or guarantee void with immediate effect.
Function check
Before start-up, check that the chain drive is working in the unloaded condition.
O
PERATION
Installation, service, operation
Operators delegated to install, service or independently operate the hoist must have had
suitable training and be competent. Operators are to be specifically nominated by the
company and must be familiar with all relevant safety regulations of the country of use.
Releasing the chain
Turn pawl rod lever to neutral (central) position. The chain can now be pulled in both directions
and the load chain fall will be quickly tensioned.
Attention: The minimum load to engage the automatic brake lies between 30 and 45 kg.
Usage of the ERGO-Lever
If the integrated handle at the lever should be used, it can be folded into the forward or
backward position. The handle will click into place with a clearly audible snapping sound. The
conical seating of the handle shall be free of dirt at all times. If necessary the seating has to be
cleaned just as well as the associated parts.
1600 kg 3200 kg 800 kg 6300 kg
1. 2.
CLICK CLICK K
CLICK CLICK C