Special Program Menu
IQDM Service Tool Owner’s Manual
Page 17
RESET ALL SETTINGS
In the event that a mistake was made and one or more changes should not have been made with the IQDM,
the speed controller settings can be reverted to the original settings from the beginning of the session (when
the IQDM was plugged into the vehicle). This function is similar to the "undo" command on a PC and will work
correctly only when the IQDM has
not
been unplugged and power to the speed controller has
not
been inter-
rupted.
Resetting All Settings
1. During an active session when the settings need to be returned to the original values (the values that
were active at the beginning of the session), press and hold the MORE INFO button while pressing the
PROGRAM button.
2. Press the SCROLL DISPLAY down button until the "reset all settings" function is on the
top line
of the
display screen.
3. After pressing the MORE INFO button, a prompt will appear to confirm the operation
(Figure 13)
. To
abort the operation, press the CHANGE VALUE down button; otherwise, proceed to the next step.
4. Press the CHANGE VALUE up button to confirm the operation.
5. The IQDM will display a "working..." message for the next few seconds while the controller settings are
being reset
(Figure 14)
.
6. When the IQDM is finished resetting the speed controller settings, a confirmation message is displayed.
CONT SETTINGS
→
PROG
This function transfers all of the speed controller settings (except for "private speed mode") from the vehicle
speed controller to the IQDM. This enables the trained technician to "clone" a speed controller. Once the
speed controller settings have been transferred to the IQDM, the technician can then connect the IQDM to
another vehicle and transfer the stored settings into the speed controller.
Figure 12 Operation Cancelled
PROGRAM
MORE INFO
SCROLL
DISPLAY
CHANGE
VALUE
TEST
DIAGNOSTICS
Summary of Contents for IQDM
Page 28: ......