Test Menu
IQDM Service Tool Owner’s Manual
Page 9
PASSWORD TRIES
An IQDM-P and password is required to place the vehicle in "private speed mode" (speed setting 4). The
speed controller will log unsuccessful and unauthorized attempts to place the speed controller in "private
speed mode". If repeated attempts are unsuccessful, the speed controller will permanently lock out access to
"private speed mode". In the event that "private speed mode" is locked out, the controller must be removed
and shipped to Club Car before it can ever be placed in "private speed mode". For more information on this
feature, contact your local Club Car distributor or dealer.
See following NOTE.
NOTE:
The IQDM cannot be used to place the vehicle in "private speed mode". "Private speed mode" can
be programmed
only
with the use of an IQDM-P handset.
THROTTLE %
Indicates the position of the accelerator pedal from 0% (pedal undepressed) to 100% (pedal fully depressed).
This item can be monitored when the key switch is in the ON or OFF position.
BATT VOLTAGE
Displays the current battery voltage.
HEATSINK °C
Displays the temperature (in degrees Celsius) of the speed controller heatsink. During normal operating con-
ditions, the heatsink temperature should be below 85 °C ±5 °C (185 °F ±41 °F).
See following NOTE.
NOTE:
Improper brake adjustment can sometimes cause the operating current to be higher than normal.
This higher current increases the temperature of the speed controller heatsink.
ARM CURRENT
Displays the motor armature current (in amperes).
FIELD CURRENT
Displays the motor field current (in amperes).
ARM PWM
Displays motor armature PWM (pulse width modulation). The range of pulse width modulation is 0% to 100%.
When the vehicle is operating at full speed, the pulse width modulation should be at 100%.
FIELD PWM
Displays motor field PWM (pulse width modulation). The range of pulse width modulation is 0% to 100%.
When the vehicle is operating at full speed, the pulse width modulation should fluctuate.
SPEED PULSES
The
speed pulses
menu item displays the activity of the motor speed sensor. With the key switch in the OFF
position, the Forward/Reverse switch in the NEUTRAL position, and the vehicle at rest, the IQDM should
should indicate that speed pulses are off. When the vehicle is gently pushed a short distance, the IQDM
should indicate that speed pulses are on.
Summary of Contents for IQDM
Page 28: ......