Special Program Menu
Page 20
IQDM Service Tool Owner’s Manual
9. The IQDM will display a "working..." message for the next few seconds while the controller settings are
transferred the IQDM’s memory to the speed controller
(Figure 14)
.
10. When the IQDM is finished transferring the speed controller settings, a confirmation message is dis-
played
(Figure 17)
.
11. Repeat this procedure for additional vehicles that need to be programmed with the same IQDM settings.
CLEAR DIAG HISTORY
The clear diagnostic history function will erase the history of faults that are stored in the vehicle speed con-
troller and displayed on the Special Diagnostics menu.
See Special Diagnostics Menu on page 15.
Clearing the Diagnostic History
1. Turn the key switch to the OFF position, place the Forward/Reverse handle in the NEUTRAL position,
and lock the park brake.
2. Plug the IQDM into the vehicle.
2.1. Connect one end of the cable to the jack located on the bottom of the IQDM unit.
2.2. Connect the adaptor to the IQDM cable.
2.3. Remove the sealed cap from the IQDM jack located on the vehicle below the Forward/Reverse
switch.
2.4. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack
(Figure 3)
.
3. Press and hold the MORE INFO button while pressing the PROGRAM button.
4. Press the SCROLL DISPLAY down button until the "Clear Diag History" function is on the
top line
of the
display screen.
Figure 17 IQDM Settings Transferred to Controller
Figure 18 Clearing Diagnostic History
PROGRAM
MORE INFO
SCROLL
DISPLAY
CHANGE
VALUE
TEST
DIAGNOSTICS
PROGRAM
MORE INFO
SCROLL
DISPLAY
CHANGE
VALUE
TEST
DIAGNOSTICS
Summary of Contents for IQDM
Page 28: ......